Search
Filters
Close

Wagner Orion 910 Pinless Wood Moisture Meter

7 Year Warranty on the Wagner Pinless Wood Orion 910 Moisture Meter
SKU: MV-16100
Free shipping
Manufacturer: Wagner
$379.00

Wagner Orion 910 Pinless Wood Moisture Meter

 

Product Description

 

The Orion 930 Dual Depth Moisture Meter:

  • Dual Depth Measurements
  • IntelliSense™ Technology
  • Fast Selection Species Settings
  • Non-Damaging Pinless Sensor
  • Virtually Unaffected by Temperature
  • On-Site Calibration
  • Relative Moisture Measurement Mode
  • Press to Hold Readings
  • Programmable Alarm
  • 7-Year Warranty
  • Ruggedized Protective Rubber Boot and Hard Case

The Orion® line of wood moisture meters continues Wagner’s 50-plus year tradition of providing accurate, dependable non-damaging pinless moisture measurement technology, measuring IN the wood not just ON the wood, and backed by Wagner’s industry-leading 7-year warranty.


The Orion 930 Dual Depth Pinless Wood Moisture Meter was designed for professional wood flooring installers/inspectors, quality control managers as well as serious woodworkers, artisans, and fabricators who need superior accuracy, versatility, and ruggedness in their critical moisture measurement instruments.

The Orion 930 has all the common features of all the meters existing:

Dual Depth Measurements

The Orion 930 Dual Depth Pinless Moisture Meter combines the Deep and Shallow readings into one Dual Depth mode. This mode provides readings at ¼” and ¾” depth modes to measure the moisture content of thin samples such as wood floors or deeper into thick wood samples to find moisture further into the wood. In ¼” mode the meter will read the moisture content from the surface level down to .25” (6mm). In ¾” mode the meter’s IntelliSense™ technology will be activated and the meter will begin to disregard surface moisture.

 IntelliSense™ Technology

The Orion 930 pinless wood moisture meter incorporates IntelliSense™ technology into its ¾” deep reading mode. This enables accurate determination of the moisture content deeper in the wood while minimizing the effect that surface moisture will have on the meter readings. Pin-type meters may be able to bypass the surface conditions, but they also damage the surface of the wood every time you take a reading. Air humidity, condensation, or other ambient conditions can impact many moisture meters and give inaccurate readings that cost you money.

 Each Orion 930 Dual Depth Pinless Wood Moisture Meter comes with the following:

1  Orion 930 Dual Depth Pinless Wood Moisture Meter

1  Paired On-Demand Calibrator

1  Rubber Protective Boot

1  Foam-lined ABS Plastic Carrying Case

1  9V Battery

 Technical Specifications:

 Dimensions with Boot

  • Length: 5.75 inches (146mm)
  • Width: 3.0 inches (76mm)
  • Thickness: 1.0 inches (25mm)

Weight with Boot

  • 7.2 oz. (204g)

Scanning Area

  • 2.0 inches (50mm) x 2.5 inches (63mm)

Power

  • 9-volt battery (Wagner recommends using non-rechargeable Alkaline or Lithium or rechargeable NiMH batteries)

Auto Power Shut-Down

  • 60 seconds

Measurement Ranges

  • MC for wood: 4.0% to 32.0% (range will vary slightly depending on species setting)
  • Relative Measurement Scale: 0-100

Specific Gravity Range for Wood Species

  • 0.20-1.0 SG

Storage Temperature and Humidity

  • +50˚F to +90˚F (+10˚C to +32˚C), Maximum relative humidity of 95%, Non-condensing

Operating Temperature Range

  • +32˚F to +110˚F (+0˚C to +43˚C)

 

Manuals

   Orion® 930 Manual
   Species Settings Booklet