HORIBA IG-320 Gloss Meter

HORIBA IG-320 60 Degree Gloss Meter          $987.00


High Precision and Great  Value Gloss Meter IG-320

Quality Manufactured - Made in Japan.
A compact easy to operate with high precision gloss measurements with 60 degree universal geometry. 
Repeatability ; ±0.5% Full Scale reproducibility.

 Call Toll Free for Personal Assistance at 1-866-462-68321-866-462-6832

                                     NO HOLD TIME

  • Provides accurate measurement results unaffected by color or ambient light
  • High Precision Measurements
  • Up to 99 Measurements can be Averaged
  • Up to 99 Sets of Data can be Stored, thus 99 Averages
  • Just press the CAL button to perform an Automatic Calibration
  • Unaffected by Ambient Light or Product Color
  • In Stock for Immediate Shipping


For your Convenience, we take MasterCard, Visa or Wire Transfers.

Contact John by email or at 866.462.6832866.462.6832 for Volume orders over ten units.



· Model
Horiba IG-320 Gloss Meter
Optical System
Incident angle 60°
Reception 60°
Measuring Area
12 mm x 6 mm oval
Light Source
LED (Wavelength: 880 nm)
SPD (Silicone photodiode)
Measuring Range
Display Range
0-199.0 (Resolution: 0.1)
±0.5% F.S., ±1 digit
Power Source
S-006P dry battery (9VDC) for operation
CR-2025 lithium battery (3VDC) for memory
Continued Use Time
15 hours or more
Ambient Conditions





































Horiba Gloss Meter Paint

 Quality control of paint and ink
For quality testing, outdoor exposure testing, hue adjustment or luster testing.



 Horiba Gloss Meter Wax

Check and diagnosis of coated surfaces
Check external coating, cleaning or waxing condition of vehicles, shops, aircraft, bridges, iron/steel frames,
and structures or prefabricated structures, etc., and diagnosis of deterioration.


Horiba Gloss meter varnish laminationChecking printed matter
Evaluation of embellishing properties in varnishing stage (lamination, endless processing, etc.); evaluation of time-induced change and uniformity of surface after drying process; checking paper surface condition.


Horiba Gloss Meter Plastics

Checking external appearance of plastic molding
For checking external appearance of molded resin products and evaluating weather resistance.




Horiba Gloss Meter Masonry FloorsChecking building and masonry finishes
Inspection of external appearance, completed product test and site finish test in production stage of enamel, sash, floor materials, stone materials, furniture, etc.




Horiba Gloss Meter Waxed Floors

Inspection of waxed floor finishes in hotels, office buildings and stores like Home depot or Lowes concrete floors.



Other uses
For checking quality and external appearance of film, tape, rubber, leather, etc.




Lost or damaged calibration plate? Here's the solution!

Replacement Calibration Plate    US$199


Larger View

©IMBOTEC All Rights Reserved