CMEX Kit #1

"In Stock"


Tramex CMEX Flooring Inspection Kit - Kit #1

Tramex CMEXpert Flooring Inspection Kit

             Visit our new CANADIAN website for newer products and information at


  1. Tramex CMEX Moisture Meter

  2. Tramex CMEX Wood Probe

  3. Tramex CMEX RH Probe

  4. Tramex CMEX 4 Sleeves

  5. Tramex CMEX Hard Case

Back to CMEX Configurations


Concrete Flooring, Hardwood Flooring, Wood Subflooring, and Environmental Monitoring

The complete Tramex Concrete Encounter CMEXpert Kit comes in a carrying case with die cut foam lining and contans the following: Concrete Encounter CMEXpert Moisture Meter, Wood Moisture Probe and a Relative Humidity Probe.

The Tramex Concrete Encounter CMEXpert is a digital display version of the Tramex Concrete Encounter CME4 hand-held electronic impedance moisture meter.

It operates on the principle of non-destructive impedance measurement. Parallel co-planar electrodes are mounted on the base which, during operation, transmit low-frequency signals into the concrete floor.

To carry out moisture tests, simply brush any dust from a smooth area of concrete and also from electrodes, switch on the Tramex CMEXpert, hold to the surface to read the percentage moisture content. Theres absolutely no surface damage and no waiting.

Flooring Manufacturers Recommended.


The Tramex Wood Moisture Probe is a hand-held attachment designed to take precise measurements of moisture content in wood and wood products when plugged into the Tramex CMEXpert.

Using electronic probes, or optional interchangeable electrodes, the Tramex Wood Moisture Probe is easy to use, extremely accurate, giving readings in 0.1% increments over the entire measurement range.

Readings are displayed on the digital LCD of the Tramex CMEXpert. The Wood Moisture Probe offers a most practical and accurate way of ensuring that wood is at the correct moisture level for its intended use, proving to be a vital tool for good quality control of wood floor installations.


When theTramex RH Probe is plugged into the Tramex Concrete Encounter CMEXpert, it automatically changes to Hygrometer Mode.

The Tramex RH Probe provides the ideal solution for Measurements of Humidity, Temperature and Dewpoint in structural materials such as concrete flooring, as well as the environmental conditions within the building or structure.

Humidity readings are displayed in both Percentage Relative Humidity (%RH) and grains/lb or grams/kg.

The solid-state capacitive sensor in the RH probe gives accurate, fast results.

Allows testing of concrete slabs (ASTM F2170-02) or RH hood (ASTM 2420-05, BS 5325:2001 & BS 8203:2001) methods.

OPTIONAL EXTRAS are a slide action hammer electrode for measuring up to a depth of 1.5 (37mm), an Infra red thermometer for measuring the surface temperature of concrete slabs and calibration check salts for the relative humidity probe.


All Tramex products carry a full satisfaction guarantee including a one year warranty against defects in parts & workmanship. Manufactured by: Tramex

CMEXpert Concrete Moisture, Wood Moisture and Humidity Meter


The CMEXpert is a complete kit for moisture testing of concrete flooring, hardwood flooring, wood sub-flooring and relative humidity monitoring

The completemoisture and humidity meter for flooring incorporating 3 modes of operation. A digital readout version of the Concrete Encounter, it measures moisture in concrete floors and other floor screeds non-destructively. Plug the Wood probe into the CMEX for accurate moisture readings in wood. The plug in humidity probe measures relative humidity, temperature, dew-point and mixing ratio. It also allows testing of concrete slabs using the In Situ (ASTM 2170-02) or RH Hood (ASTM 2420-05, BS 5325:2001 & BS 8203:2001) methods.

Visit for newer products and information from Canada

Larger View

Larger View

©IMBOTEC All Rights Reserved