Wood Professional

Tramex Professional Wood Meter 2.0

Our Price


“Flooring Installers – Inspectors”

“For Professional Wood Moisture

Measurement in any Wood Species”

Visit our new CANADIAN website for newer products and information at www.moisturemeter.ca


Used by Home Inspectors in the USA and Canada.

See our professional line of Kits below.

“Just a drop of water a day can lead to dry rot, mildew, and other undesirable results.”


The Professional Moisture 2.0 meter for Wood is a small handheld digital pin type moisture meter made by world famous Tramex. Tramex only specializes in Construction Industry Moisture meters! Tramex is the World’s Largest Moisture Meter manufacturer for the construction industry. The Professional Moisture Meter is the top of the line Wood Moisture Meter from Tramex. It is an upgrade from the older analog Tramex Compact unit.

            (If you are looking for pinless NDT wood moisture meter, see the ECO-10HD.)


The Tramex Professional Moisture Meter 2.0 measures wood species between 7- 40% with temperature charts from 40° to 158°F and also incorporates a 500 pre-programmed wood species. Note that wood becomes saturated at 27% moisture. The Tramex Professional Moisture Meter 2.0 is powered by a 9V battery within a lightweight sturdy aluminum body. For hard to reach areas (home inspectors), the professional moisture meter has a HOLD button to lock the reading.


Tramex Professional Moisture Meter for Wood



·          New Hardwood Flooring Installation (New wood cannot be more than 4% from substrate).

·          Old Hardwood to measure substrate through the hardwood (problem determination, req. hammer probe)

·          Measure wood behind the drywall (suggest 8” and 3½” Pins & Hand Probe)

·          Rough Cut

·          Mold Remediation (see our special kit)

·          Furniture – Cabinet maker

·          Finding Rot, termites



·          Building Inspectors

·          Home Inspectors

·          Bathroom Renovators (looking for mold)

·          Mold Remediation

·          Wood Flooring Contractors

·          Carpet Installers

·          Roofing Contractors

·          Building Contractors

·          Pest Control - termite – ants



·          Digital Large LCD Readout to 0.1% Accuracy

·          Digital, not like the Analog lower cost Compact

·          For Greater Use Optional Probes

o         Hand Held Probe with 1.2” (30mm) pins

§          Can use 8” , 3.5”, and std. 1.2” Pins

o         Hammer Probe with 2” Insulated pins

§          Can use 2” and the 1.5” Pins 

·          0.7” Pin standard with Professional Moisture Meter

·          Optional Pins

o         8” (200mm) pins for a penetration of 7” (175mm)

o         3½”(90mm) pins for a penetration of 2.8” (72mm)

o         2”(52mm) pins for a penetration of 1.5” (36mm)

o         1.2”(30mm) pins for a penetration of 0.5” (14mm) “NO Stock of these”

·          9V Battery

·          Hold button to record reading

·          Auto shut-off after 4 minutes for optimal battery life

·          Button to switch to °F or °C


Simple Operation:

Measure Moisture:

-Simply choose a dry area, press the ON button and just press the two pins at the front of the moisture meter into any wood. Instantaneously, the moisture is displayed in % moisture on the large LCD

Want to measure wood that is wet on the surface:

-Use insulated 2” pins with a hammer probe or use a hand probe with insulated pins. Place probe pins on wood, slide metal weight to top position and quickly drop the weight pressing into the wood. The pins will be driven in like a pile driver.  View the reading in % moisture.

Want to measure within a cavity:

-Use 8” or 3.5” Insulated pins with the Hand Probe, press the ON button, press the hand probe until it goes into the cavity and penetrates wood and read the LCD Display.

Want to use the Professional Moisture Meter on different species:

-Use as normal and then go to the instruction manual on Pages 6 to 17.

Want use on wood that is either hot or cold:

- Use as normal and then go to the instruction manual on Page 5.






Need a Special Meter-Pin Combo?



Looking for a Professional High Quality but larger Industrial Kit at a bargain price? Our Imbotec Kits are available in many configurations.  

-We have the World’s Largest Choice of available kits for commercial or residential hardwood installers, contractors, home inspectors, mold remediation, wood or bathroom renovators and more at unseen prices. Our large inventory keeps your price down.  To see our full range of kits, check our new website at www.moisturemeter.ca.




To Purchase this Professional Moisture Meter online, click on the VISA/MasterCard Buy Now Icon at the top of the Page.


To Purchase a combination of tools, call John, Toll Free  at 1.866.IMBOTEC (462.6832)

Pay by credit card – VISA or MasterCard.



For business owners wanting their installers to have the necessary right tools to determine whether an installation should go move ahead. Should an installer find conditions that are high in moisture or humidity, an immediate stop can occur until the area of concern has been determined and corrected. This stop will save you from having to redo floors for warping, buckling or cupping or gaps and save you thousands in profit. Before work starts, measure ambient, existing concrete or substrate, and new wood.

For Contractors, you can measure below carpeting, below hardwood, behind drywall, etc. To measure below ceramic tile or for drywall, see the Tramex MRH.


Visit www.moisturemeter.ca for newer products and information from Canada

Larger View

Larger View

Larger View

Larger View

Larger View

©IMBOTEC All Rights Reserved