Tramex CMEX-Wd-Hmr

CMEX + Hammer and Wood Moisture Probes & case




Our Price


     In Stock

             Visit our new CANADIAN website for newer products and information at


             Concrete Moisture,   Wood Moisture,   RH “relative humidity”

            “Flooring Manufacturer’s Recommended”          ASTM F2170-02 & F2420-05

Used by Hardwood Flooring Contractors and Home Inspectors


Add the Hammer Probe and the new interface electronics to the CMEX Moisture Meter and the Wood Probe and now use one meter to measure through hardwood to check the condition of the sub-floor without the expense of removing it. You now have a Concrete and Complete Wood Moisture Measurement Solution. Use one meter to measure the top hardwood and the substrate under the hardwood, and also the concrete slab. Plug the Hammer Probe into the wood probe into the CMEX and now one has a professional accurate resistance Hammer Style type pin meter. The Hammer Probe permits you to use a heavy steel chunk of metal to pound the pins through any wood. The metal slider slides up and down on the long handle like a pile driver. This wood probe also provides moisture readings between 7% to 40% in wood. A great hammer moisture probe for wood installers wanting to measure a substrate under the flooring for moisture cause determination.


Buy the CMEX, Probe and Wood Hammer Probe combination at the same time and SAVE BIG.

Get the convenience and save by purchasing a complete kit below.


Optional Relative Humidity Probe for either in-situ probe method ASTM F 2170-02 and the Hood Method ASTM F 2420-05. We also carry the Hood for NDT “non destructive testing”.



·          New 2006 NDT

·          Spring Loaded electrodes for excellent contact

·          Digital large LCD for easy readability 0% - 6.9%

·          Hold button to record reading

·          Auto shut-off for optimal battery life

·          Wood probe “auto detect” 7% – 40%

·          Hammer 1.5” probe (requires above wood probe)

·          Optional RH & temp., dew pt. probe for concrete/ambient conditions

·          Button to switch to °F or °C

·          CMEX comes in a high impact polypropylene die cut foam lining


Simple Operation:

Measure Concrete % Moisture:

-Simply choose a dry slab area, dust-off the area and place the meter on the slab. Turn it on and read the moisture presented in % moisture. No drilling or no damage to floor, NDT.

Want to measure wood:

-Plug in the tel. style jack into the CMEX and the unit automatically switches to wood moisture. Press the pins into the wood and view the reading in % moisture.

Want to measure the substrate:

-Plug in the Hammer Probe with 1.5” insulated pins to go right through the hardwood floor into the substrate.

Want to use the Hygrometer RH probe for room ambient conditions:

-Plug in the RH Probe tel. style jack into the CMEX and the unit automatically switches to temperature, % Humidity, Dew point, and gr/lb (g/kg).

Want RH in concrete:

-Use the RH probe and place into the sleeve in the concrete or into the hood. All available from Imbotec Group, the moisture knowledge specialists.


Get the convenience and save by purchasing a complete kit below. World’s Largest Selection of Wood Flooring Installer – Mold Remediation – Contractor – Home Inspector KITS.


We sell at below List Price due to our high purchasing capability.


Call Toll Free to purchase if you wish. Dial Toll Free 1.866.IMBOTEC (462.6832)



List Price

Imbotec Price




CMEX + Wood Probe + Case Hammer Probe


$980.,   C$1280.

CMEX + Wd Prb + RH Prb + Hood + Sleeves + Case



Get above 6 items plus the Hammer Probe - CEMEX +




-We have the World’s Largest Choice of Moisture Measurement KITS available for commercial or residential hardwood installers, contractors, home inspectors, mold remediation, wood or bathroom renovators and more.


Our Imbotec Kits include a Hard Die Cut Foam Filled Case, Thermo-Hygrometer, Nail Finder and IR Temperature Gun along with a choice of the following;



CMEX Moisture Meter & Wood Probe

CMEX Hammer Probe

CMEX RH Hygrometer Probe

RH Sleeves for RH Probe - slab holes

Hood for RH Probe (comes with Kits)

LEICA Laser Distance A3 or A5 models

MRH Moisture Meter – wood, drywall, roof, ceramic

MRH RH Hygrometer Probe

ECO-10 non pin Wood Meter

Pro Wood ¾” pin Moisture Meter

Hand Probe 1” pin for Pro Wood

3” Ins. Pins for Hand Probe SPI-90 $59.

7” Insulated Pins for Hand Probe SPI-200 $75.

Hammer probe with 1.5” Probe

1.5” Pins for Hammer Probe SPI-52 $27.

Cal. Check for RH or Moisture Meters

Nail Finder Hand Held Sensor

Infra Red Temperature Gun

Hand Held Hygrometer for ambient temperature and humidity

Professional 45° - 90° - Horizontal – Vertical  Laser Align for concrete leveling or hardwood installers, carpet installers. High power for long lines, not comparable to store models.


To Purchase a combination of tools, call John, Toll Free  at 1.866.IMBOTEC (462.6832)

Pay by credit card – VISA or MasterCard.



We offer volume discounts (5 kits+) for store owners willing to sell to their installers.


1.866.IMBOTEC (462.6832)


Visit for newer products and information from Canada


We can ship Tramex meters for moisture in wood or concrete locally from Canada, within Toronto, GTA, Mississauga, Brampton, greater Toronto, Quebec, Montreal, Maritimes, British Colombia and the rest of Canada.


Larger View

Larger View

Larger View

Larger View

Larger View

©IMBOTEC All Rights Reserved